Description
NEW RS MK2 CUSTOM MAPPING FROM MAXD – MAXD-OUT Software
- Simple plug and play custom tuning procedure.
- No need to open the ECU
- Uses any Windows based PC
- Tune your RS Focus Mk2 anywhere in the world
- We include 5 MAXD Tuning Files
MAXD-OUT – FOCUS RS Mk2 Custom Tuning Perfection , Total control for your RS Focus
Many rolling road days have gone into developing the all new MAXD Focus RS Mk2 Software.
MAXD-OUT Software can now give you the total control and custom tuning files you desire and email them worldwide.
MAXD can even supply a custom tune whilst your car is sat on the dyno.
NO NEED TO OPEN THE ECU WITH THE NEW MAXD-OUT SOFTWARE
MAXD-OUT – FOCUS RS Mk2 Custom Tuning Perfection , Total control for your RS Focus
NO NEED TO OPEN THE ECU WITH THE NEW MAXD-OUT SOFTWARE
What do you get ?
You get the custom tune box and connecting cable + the USB stick with MAXD OUT upload software and the tunes below.
MAXD PS475 – Aggressive remap specifically for cars with the full bolt ons and Stage 2 Hybrid Turbos.
You Also Get a Free Update to the very Latest CL version software with the MAXD tuning Box
For all 2009-2011 vehicles with any firmware version before CL MAXD have written a conversion file that allows the car to have the updated CL 2011 version firmware. Once this free upgrade is performed the car will have genuine Ford OE CLsoftware. After this update any of the new files can be uploaded to the early car without a trip to the Ford agent.
What do you get ?
tunes below.
MAXD PS475 – Aggressive remap specifically for cars with the full bolt ons and Stage 2 Hybrid Turbos.
You Also Get a Free Update tYou Also Get a Free Update tYou Also Get a Free Update to the very Latest CL version software with the MAXD tuning Box
Special Order and Custom maps.
Piston and Rod Conversions are advised for all the below conversions.
MAXD PS475 – Aggressive remap specifically for PS400 cars with the high volume 340lph fuel pump and Stage 2 hybrid turbos and Stage 1 Camshafts
MAXD PS500 – Aggressive remap specifically for PS400 cars with the add high volume 340lph fuel pump and Stage 3 hybrid turbos and Stage 2 Camshafts
MAXD Custom – MAXD-OUT offer a fully bespoke custom Mapping service please call us to discuss your requirements and vehicle specification. The vehicle will need to spend 1 day on the MAXD Dyno and will exit with the exacting engine calibration available
Email for more Information on the Newest and the most impressive Software we have tested..
The Mapping device – FAQ’s
Do i need to send my ECU or open the ECU to program the car ?
– No, the MAXD Tuning box allows you to communicate with the car and upload update files and stock files and of course the tuning files.
Can the box be used to turn my vehicle back to the original stock file at any time ?
– Yes, the box allows you to store the original file and then allows you to install your stock mapping any time you need.
What happens to my stock mapping ?
– We will send the very latest Stock ECU file coded ‘CL’ so the car can be put to stock at any time you wish
What if my car is already mapped?
– Your ECU will be updated by the MAXD tuning system, what ever file is on the car will be over written and lost.
Is the Software easy DIY install on and off the car ?
– Yes the custom software is very simple to use and runs on any Windows XP ,Vista or 7 laptop.
Can I upgrade the maps to a higher level ?
– Yes the benefit of the system is that MAXD can easily send you upgraded files from the above list.
Can MAXD write a custom file to suit my list of mods ?
– Yes the in house calibration specialists at MAXD can tailor a mapping to suit you and your driving style. Whilst MAXD research and development does run through most case scenarios there will always be the requirement for that one off special.They can also custom tune your own car if you are willing to travel to them or can datalog the car and send the info to head office.
Can i use the device on more than one vehicle ?
– No the MAXD device locks itself you your vehicles VIN number and cannot be used on another vehicle, it has 1 life only and should remain with the vehicle when sold.
Can I use different fuels ?
– The mappings are written to run on 98/99 octane UK fuel. They can be safely used on 95 octane fuel in daily use as we leave a very high percentage of knock control in the mapping. Full throttle and high load should be avoided when using low grade fuels on any mappings not just the MAXD Ultimate series
Does the mapping affect the immobilizer ?
– MAXD maps will not affect the vehicle immobilizer in any way.
Can I download a stock map?
– If your car has already been mapped elsewhere and you want to return it to standard, MAXD provide a standard tune for this purpose.
Special Order and Custom maps.
Piston and Rod Conversions are advised for all the below conversions.Piston and Rod Conversions are advised for all the below conversions.
MAXD PS475 – and Stage 2 hybrid turbos and Stage 1 Camshafts Stage 2 hybrid turbos and Stage 1 Camshafts
MAXD PS500 – – and Stage 3 hybrid turbos and Stage 2 Camshafts Stage 3 hybrid turbos and Stage 2 Camshafts
MAXD Custom MAXD Custom
Email for more Information on the Newest and the most impressive Software we have tested..
The Mapping device – FAQ’s
Do i need to send my ECU or open the ECU to program the car ?
Can the box be used to turn my vehicle back to the original stock file at any time ?
What happens to my stock mapping ?
What if my car is already mapped?
Is the Software easy DIY install on and off the car ?
Can I upgrade the maps to a higher level ?
Can MAXD write a custom file to suit my list of mods ?
Can i use the device on more than one vehicle ?
Can I use different fuels ?
Does the mapping affect the immobilizer ?
Can I download a stock map?
Reviews
There are no reviews yet.