Forscan Diagnostic ELM327 Cable

Description

For ST180 we suggest Logging the Following
For all power run tests please start the log from around 1250 revs in 3rd or 4th gear, the throttle pedal must be fully depressed and the run end when you feel safe. We do prefer a pull to the Rev limit but please only do this if is safe and legal to do so.

RPM
TP
APP_REL
SPARKADV
AICPB1
AECPB1
LOAD_ABS
EQ_RAT11
TURBO_WGATE
TIP_PRS-BOOST
SHRTFT1
FRP
For the new ST Mk8 we suggest Logging the Following

RPM                      Engine Revolutions Per Minute
CATEMP11          Catalyst Temperature Bank 1, Sensor 1
EQRAT11_CMD Commanded Equivalence Ratio (Air to Fuel Mixture) Bank 1
EQ_RAT11           Equivalence Ratio (Lambda) (Bank 1, Sensor 1)
TP_REL                Relative Throttle Position
SPARKADV          Spark Advance
LOAD_ABS          Absolute Load Value
FRP                       Fuel Rail Pressure
TCBP                     Measured Boost at Throttle Inlet Pressure Sensor
TURBO_WGATE Turbocharger Wastegate
IAT                        Intake Air Temperature
SHRTFT1               Short term fuel trim 1